MadeStone

YUCERA Dental Zirconia Blocks Coloring Liquids Using Steps

Просмотры:
25
Дата загрузки:
30.01.2024 19:00
Длительность:
00:04:30
Категория:
Технологии и интернет

Описание

Steps:
Preparation before dyeing: Thoroughly clean the surface of the restoration and the zirconia powder in the crown with the plastic brush.

Pour the appropriate amount of translucency liquid into a clean, dry container, and mix the special colors liquid.

Note: The indicator has no effect on the color after the restoration is sintered.

Use OP pen to dip appropriate amount of translucency liquid(TO), the first pass: brush on the one-third incisor end.

Second pass: Use OP pen to paint vertically.

Paint the triangular ridge that is obviously raised on the maxillofacial surface.

The brushing process of translucency liquid(TO) at the on third incisor end of the bridge is the same as the single crown.

Paint one-third incisor end with OP pen.

Paint the triangular ridge that is obviously raised on the maxillofacial surface.

Paint with dilution liquid on each surface of the pontic.

Note: The size of each pontic is different. If the pontic is too large, you need to paint it one more time.

Please verify the production date, and shake it evenly before using the coloring liquid.

The crown must be completely immersed in the staining solution for 60 seconds.

Shaking the crown with tweezers to remove the gas pockets.

Clean staining solution in the crown and maxillofacial area with tissue.

It is recommended to dry for 20 minutes at a temperature of 120℃.

It is recommended that the long bridge or the toothless area be dried for more than 50 minutes at a temperature of 120℃.

Precautions
1, The crown must be kept clean and dry when deying(it is not recommended flush processing, if needed the crown must be dried before deying).
2, Do not dilute the coloring liquid with water by yourself to avoid affecting the color stability.
3, The crown must be sintered after drying to avoid contamination of the internal parts of the sintering furnace, and cracks are prone to appear in the crown.
4, Dental bridge staining is recommended to use the pontic solution method to reduce the color difference with the crown.
5, The staining solution is weakly alkaline. Those with skin allergies are advised to wear gloves. If it splashes into the eyes accidentally, please rinse immediately and consult a doctor in time.

Thanks for watching. For more information about YUCERA Dental, please feel free to contact us
Website: www.yuceradental.com
Email: sales@yuceradental.com

Источники:

Рекомендуемые видео